Green screen problems are not uncommon, especially with smartphones featuring OLED displays. Brands like iPhone, Samsung, OnePlus and Motorola often incorporate these advanced displays into their flagship devices. If you’re encountering a green screen issue on your iPhone 13 series or a similar device, fret not. In this guide, we will walk you through a simple DIY method to potentially resolve this problem. However, please note that if you’re not confident or experienced with electronics, it’s best to seek professional help to avoid causing further damage.
Step 1: Identifying the Problem
A sudden appearance of green on your display after software update can be frustrating. It may indicate a problem with the display itself, necessitating a repair or replacement.
Step 2: Assess the Damage
Before attempting any repairs, carefully inspect your device for physical damage or signs of malfunction. If the green screen issue is due to physical damage, such as a cracked display, it may require professional repair or replacement.
Step 3: DIY Repair Method
If there’s no visible physical damage and you’re comfortable attempting a DIY repair, here’s a simple method to address the green screen problem:
Gather Necessary Tools: You’ll need a Screen removal kit, soldering iron, solder wire, flux, and a jumper wire.
Locate the Problematic Points: Identify the points to solder jumper wire These points may vary depending on the specific device model, so refer to repair guides or schematics.
Solder Jumper Wires: Carefully solder jumper wires to the identified points on the circuit board. Ensure that the connections are secure and free from any short circuits. This step requires precision and steady hands, so take your time and proceed with caution.
Test the Display: Once the jumper wires are soldered in place, reassemble the device and power it on. Check if the green screen issue has been resolved. If the problem persists, double-check the connections and consider seeking professional assistance.
